Hanging Pulleys intended for Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move an individual load, such as block and deal with systems. They require about 50 % the power of a single-groove pulley to go the same load.
Pulleys with a bearing are easier to change than pulleys with out a bearing.
Acetal, nylon, and aluminium are light-weight and corrosion resistant. Stainless steel is the most corrosion resistant.
Designs C, D, and J have got a bracket on the bottom for tying off a single end of a rope.
Style K decrease the force needed to hold your load set up. Unlike standard pulleys, these possess a V-groove for more hold on your rope, plus they ratchet when under load therefore they won’t slip in the other direction. Pulley for3/8″ dia. rope can be established to ratchet even when not under load.
Mounted Pulleys for Rope-For Horizontal Pulling
Mount these pulleys to a set surface to aid with horizontal pulling or even to guide a rope.
Pulleys with a bearing are easier to convert than pulleys without a bearing.
Aluminum and nylon are light-weight 
and corrosion resistant. Stainless steel gets the most corrosion resistance.
Pulleys for Rope-For Horizontal Pulling
Also referred to as sheaves, use these pulleys to assist with horizontal pulling or even to guide a rope.
Pulleys with a bearing are simpler to switch than pulleys without a bearing.
Acetal and light weight aluminum are lightweight and corrosion resistant. Galvanized steel can be more corrosion resistant than iron and metal. Stainless steel is the most corrosion resistant.
Easy-Open up Hanging Pulleys for Rope-For Horizontal Pulling
Also known as snatch blocks, these pulleys open so it is easier to feed the rope through the housing-a free rope end isn’t needed. Use them to assist with horizontal pulling or even to guide a rope.
Pulleys with a bearing are simpler to convert than pulleys with out a bearing.
Aluminum is more light-weight than stainless steel. Stainless is certainly more corrosion resistant than aluminum.
Pulleys for Wire Rope-For Horizontal Pulling
Also referred to as sheaves, use these pulleys to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are simpler to convert than pulleys with out a bearing.
Acetal and nylon are lightweight and corrosion resistant. Stainless is the most corrosion resistant.
Mounted Pulleys for Wire Rope-For Horizontal Pulling
Mount these pulleys to a flat surface to aid with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and deal with systems. They require about 50 % the power of a single-groove pulley to go the same load.
Pulleys with a bearing are simpler to change than pulleys with out a bearing.
Stainless steel can be more corrosion resistant than steel.
Hanging Pulleys for Wire Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to aid with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move an individual load, such as for example block and deal with systems. They require about half the push of a single-groove pulley to move the same load. They have a bracket on underneath for tying off one end of your wire rope.
Pulleys with a bearing are simpler to convert than pulleys with out a bearing.
Nylon is much lighter than metal. Aluminum is certainly corrosion resistant. Stainless steel may be the most corrosion resistant.
Pulley with carabiner may mount to steel framing or hang as part of your rigging system.
Easy-Open Hanging Pulleys for Wire Rope-For Horizontal Pulling
Also known as snatch blocks, these pulleys open so it’s simpler to feed the rope through the housing-a free rope end isn’t needed. Use them to assist with horizontal pulling or even to guide a rope.
Style D pulleys possess a corrosion-resistant stainless housing.
Pulleys for Wire Rope-For Lifting
Utilize the bore to attach these pulleys on a shaft. These pulleys are also called sheaves.
Pulleys with a bearing are simpler to change than pulleys with out a bearing.
Nylon pulleys are lighter in weight than steel pulleys.
Warning: Never use to lift people or items over people.
Mounted Pulleys for Wire Rope-For Lifting
Attach these pulleys to a set surface.
Pulleys with two grooves are for make use of in applications where multiple pulleys move a single load, such as block and tackle systems.They are able to reduce the force had a need to move the load by up to two times compared to single-groove pulleys.
Pulleys with a bearing are easier to switch than pulleys with out a bearing.
Stainless steel pulleys are more corrosion resistant that steel.
Style 3 pivots up to 200° for different pull directions.
Warning: Never use to lift people or products over people.
Hanging Pulleys designed for Wire Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are for make use of where multiple pulleys move a single load, such as for example block and deal with systems. They require about 50 % the pressure of a single-groove pulley to go the same load.
Pulleys with a bearing are simpler to convert than pulleys with out a bearing.
Style E pulleys have bracket upon the bottom that lets you tie off a single end of your wire rope.
Warning: Never use to lift people or items over people.
Easy-Open Hanging Pulleys for Wire Rope-For Lifting
Also referred to as snatch blocks, these pulleys open so it’seasier to feed the rope through the housing-a free rope end isn’t needed.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and tackle systems. They require about 50 % the push of a single-groove pulley to move the same load.
Latch kits (sold separately) add a latch to the swiveling hook on Design C to keep rope secure.
Warning: Never make use of to lift people or products over people
Hanging Pulleys meant for Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are found in applications where multiple pulleys move a single load, such as block and tackle systems. They are able to reduce the force needed to move the load by up to 2 times compared to single-groove pulleys.
Pulleys with a bearing are simpler to switch than pulleys with out a bearing.
Style A pulleys possess a bracket on underneath for tying off one end of a rope.
Warning: Never make use of to lift people or products over people.
Easy-Open up Hanging Pulleys for Rope-For Lifting
Also referred to as snatch blocks, these pulleys open so it is easier to feed the rope through the housing-a totally free rope end is not needed.
Warning: Never use to lift people or products over people.
