These rack & pinion drives are perfect for a wide variety of applications, including axis drives requiring precise positioning & repeatability, traveling gantries & columns, pick & place robots, and materials handling systems. Heavy load capacities and duty cycles can also be easily managed with these drives. Industries served include Materials Handling, Automation, Aerospace, Machine Tool and Robotics.
Eliminates the necessity for a separate mounting surface for the rail
Additional alignment between your rack and rail is not necessary
Space-saving, performance optimized designs may be accomplished
Different quality racks available for best price-performance ratio
Allows assembly of rack and rail from machine frame
This rack range further expands the already wide range of ATLANTA rack & pinion drives. With this range, you’ll be able to achieve optimal designs for every application constraints. For recommendations about how to integrate the Integrated Rack into your design, please seek advice from the factory.
Teeth: The teeth are the portion of the apparatus that makes contact with another gear. To ensure that two gears to mesh jointly the pitch must be the same for all mating pairs. The pitch of a equipment may be the distance between comparative points of adjacent teeth. When the teeth of gears mesh properly they prevent slipping and 
can exhibit efficiencies of up to 98%.
Our Integrated Racks attach directly to most standard linear manuals, eliminating the necessity for additional machining and alignment, saving money and time. Key benefits include:
Radius: The gear radius is defined differently depending on the particular section of the gear being discussed. Both most relevant measurements, however, will be the root radius and the addendum radius. The main radius may be the distance from the guts of the gear to the base of the teeth as the addendum radius (also known as the “pitch” radius) may be the distance from the center of the gear to the exterior of the teeth.
In order to ensure that the apparatus rack you get is right for the application, seek out a trusted and experienced gear rack manufacturer who will take the time to listen to your application to be able to suggest the right product. Depending on the application and the requirements of that application, one’s teeth on the apparatus rack may need to become spaced a certain way to be able to Gear Rack For Rack Actuator provide correct torque and effectiveness. This small change can make an environment of difference in how your steering system or railway track features.
Gears are mechanisms that mesh together via the teeth and are used to transmit rotary motion from one shaft to some other. Gears are described by two essential items: radius and amount of teeth. They are typically mounted, or connected to other parts, with a shaft or base.