Flexible plastic equipment racks in 0.8 Mod (32DP) pitch. These racks can provide an easy to set up rotational drive as high as approx 270 degrees for example on camera focus bands. They also provide an economical solution where a large gear is required or a longer stretch (up to 2 metres) of linear movement is desired. These racks are compatible with our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER stock racks are made for high precision linear motion applications. You can expect a large selection of racks which range from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Surface Racks (MRGF – MRGFD) : Has the highest strength and precision in the EVER-POWER standard rack series. Bolt holes could be remachined as carburizing can be applied just within the tooth region. J Series items are also available.
Hardened Floor Racks (KRGF-H – KRGFD-H) : Warmth treated floor gears with high precision and strength has excellent cost-overall performance ratio. J Series products are also available.
Hardened Racks (KRF-H/KRFD-H) : That is a solid rack manufactured from Chromoly steel, treated simply by carburizing. Has high-strength, high wear resistance, and enables downsizing of SR racks. J Series items are also available.
Hardened Racks (SRF-H/SRFD-H) : Steady Hardened racks with high power, long life span are affordable. J Series items are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Metal Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack has the same tooth elevation and encounter width sizes, smaller sized and reasonably priced in comparison to SRF Racks
Steel Racks (SR) : Low priced, large selections of modules and number of the teeth. J Series products are also available.
Metal Racks w/ Machined Ends (SRF) : Low priced, large choices of modules and number of tooth. J Series items are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low priced, large selections of modules and number of tooth. J Series items are also available.
Stainless Steel Racks (SUR•SURF•SURFD) : Suitable for food machinery due to SUS304 material\’s rust-resistant quality.
Plastic-type Racks (DRF/DRFD/DRFK) : Plastic racks with small dimensional change, absorb lesser water than MC Nylon racks. J Series products are also available.
Plastic material Racks (PR•PRF) : Produced form MC nylon, can be utilized without lubrication.
Brass Racks (BSR) : Small pitch racks made of free-reducing brass, excellent workability and high rust resistance.
Steel Round Racks (SRO – SROS) : Convenient in applications where the rack gets the reciprocal motion. S Type is simple to install.
Stainless Steel Round Racks (SURO) : Same dimensions as SRO racks, except in stainless steel. Use where rust-resistance is required.
Floor Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent items with high precision and power, and low noise and abrasion characteristics.
Metal Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration because of larger contact ratio of helical gears.
Molded Flexible Racks (DR) : Used in applications because of its flexibility, where metallic racks do no possess this attribute. Pinions and add-ons are also available.
Molded Flexible Rack Clamps (SRS) : Utilized to secure Molded Flexible Racks.
Molded Flexible Rack Pinions (SSDR) : Spur pinions utilized for molded flexible racks.
Flexible Rack Guideline Rails (ARL) : Guideline Rails for Molder Versatile Racks.
We offer as standard a wide variety of Racks in Metric and Imperial sizes. Spur Racks can be found in Steel (En8) and up to 2 metres in length. STAINLESS and Delrin (Plastic) Racks are created with Spur and Helical tooth forms, square and round sections up to 400mm long. Alternative materials can be found on ask for. Moulded Hostaform Racks can be found to offer an economical alternative where less torque is required.
Variable stiffness can improve the capability of human-robot interacting. Based on the mechanism of a flexible rack and gear, a rotational joint actuator named vsaFGR can be proposed to modify the joint stiffness. The flexible gear rack can be regarded as a combination of a nonlinear elastic element and a linear adjusting system, providing advantages of compactness. The joint stiffness is definitely in the range of 217-3527 N.m/rad, and it is inversely proportional to the 4th-purchase of the apparatus displacement, and almost independent from the joint angular deflection, providing benefits of quick stiffness regulation in a short displacement of 20 mm. The gear displacement with respect to the flexible gear rack is certainly perpendicular to the joint loading force, so the power required for stiffness regulating is really as low as 14.4 W, providing benefits of energy saving. The high compactness, great stiffness range and low power cost of vsaFGR are proved by simulations and experiments.
Flexible plastic gear racks in 0.8 Mod (32DP) pitch. These racks can provide an easy to install rotational drive as high as approx 
270 degrees for example on camera focus bands. They also offer an economical answer where a large gear is required or a longer stretch (up to 2 metres) of linear motion is desired. These racks are appropriate for our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER stock racks are made for high precision linear movement applications. You can expect a large collection of racks which range from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Surface Racks (MRGF – MRGFD) : Has the highest power and precision in the EVER-POWER standard rack series. Bolt holes could be remachined as carburizing is usually applied only within the tooth area. J Series products are also available.
Hardened Ground Racks (KRGF-H – KRGFD-H) : Warmth treated floor gears with high precision and power has excellent cost-overall performance ratio. J Series items are also available.
Hardened Racks (KRF-H/KRFD-H) : That is a solid rack manufactured from Chromoly steel, treated by carburizing. Has high-strength, high wear level of resistance, and allows downsizing of SR racks. J Series items are also available.
Hardened Racks (SRF-H/SRFD-H) : Stable Hardened racks with high strength, extended life span are affordable. J Series items are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Metal Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack has the same tooth height and encounter width sizes, smaller sized and reasonably priced in comparison to SRF Racks
Steel Racks (SR) : Low cost, large selections of modules and quantity of teeth. J Series products are also available.
Steel Racks w/ Machined Ends (SRF) : Low priced, large selections of modules and number of tooth. J Series products are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low priced, large selections of modules and amount of tooth. J Series items are also available.
STAINLESS Racks (SUR•SURF•SURFD) : Ideal for food machinery due to SUS304 materials\’s rust-resistant quality.
Plastic-type Racks (DRF/DRFD/DRFK) : Plastic racks with little dimensional change, absorb lower water than MC Nylon racks. J Series items are also available.
Plastic-type Racks (PR•PRF) : Produced form MC nylon, can be used without lubrication.
Brass Racks (BSR) : Small pitch racks manufactured from free-reducing brass, excellent workability and high rust resistance.
Steel Round Racks (SRO – SROS) : Convenient in applications where the rack has the reciprocal motion. S Type is easy to install.
Stainless Steel Round Racks (SURO) : Same dimensions as SRO racks, except in stainless. Make use of where rust-resistance is necessary.
Floor Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent items with high precision and power, and low noise and abrasion characteristics.
Metal Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration due to larger contact ratio of helical gears.
Molded Flexible Racks (DR) : Used in applications due to its flexibility, where metallic racks do no have this attribute. Pinions and accessories are also available.
Molded Flexible Rack Clamps (SRS) : Used to secure Molded Flexible Racks.
Molded Versatile Rack Pinions (SSDR) : Spur pinions used for molded versatile racks.
Flexible Rack Instruction Rails (ARL) : Guideline Rails for Molder Flexible Racks.
We offer as standard a wide variety of Racks in Metric and Imperial sizes. Spur Racks can be found in Steel (En8) or more to 2 metres long. STAINLESS and Delrin (Plastic-type) Racks are produced with Spur and Helical tooth forms, square and circular sections up to 400mm in length. Alternative materials are available on ask for. Moulded Hostaform Racks can be found to offer a cost-effective alternative where much less torque is required.
Variable stiffness can enhance the capability of human-robot interacting. Based on the mechanism of a versatile rack and equipment, a rotational joint actuator called vsaFGR is proposed to modify the joint stiffness. The versatile gear rack could be regarded as a combination of a nonlinear elastic component and a linear adjusting system, providing benefits of compactness. The joint stiffness is certainly in the range of 217-3527 N.m/rad, and it is inversely proportional to the 4th-purchase of the gear displacement, and almost independent from the joint angular deflection, providing advantages of quick stiffness regulation in a brief displacement of 20 mm. The gear displacement with regards to the flexible equipment rack can be perpendicular to the joint loading force, so the power required for stiffness regulating is as low as 14.4 W, providing advantages of energy saving. The high compactness, great stiffness range and low power cost of vsaFGR are proved by simulations and experiments.
