Micro channel parallel movement radiator professional producer
The condenser-a part of the air conditioning circuit-is built-in into the motor cooling module, where it is employed to great down and condense the compressed, gaseous refrigerant from the compressor. We produce brazed, flat tube condensers that supply higher performance in spite of their compact and lightweight style. They guarantee rapid cooling of the passenger compartment many thanks to optimum matching of warmth transfer and strain fall on the two the coolant and the air facet.
The condenser is a warmth exchanger in a mobile A/C system. Presently, condensers are normally manufactured of aluminum, but in the earlier, some were created of copper/brass. Condensers seem very a lot like radiators, just a minor thinner, and considering that they also depend on air flowing via them, are usually situated in front of the radiator.
Like radiators and evaporators, condensers are also made as a series of tubes with fins all around them. its job is to launch warmth. Far more especially, to release the heat the refrigerant absorbed while it was flowing via the evaporator, quite a lot the same way the radiator releases the warmth from motor coolant that the coolant absorbed whilst it was flowing through the engine. The refrigerant enters the condenser as a high-force vapor, but as it flows by way of the condenser and cools, it turns back again into a cooler substantial-force liquid.
1 adopt low height fins and multiple flat pipes to increase the heat dissipation area and improve the heat dissipation performance.
2 fin special treatment to enhance lodging resistance and maintain the tidiness of the products’ appearance
3 powder coating on the products can enhance corrosion resistance and improve product life cycle.
4 none- argon arc welding solder products look different.
5 every product’s pressure is maintained by using nitrogen so the product is free from leakage at 100% before it leaves the factory
one. Generic products are supposed to be manufactured strictly according to the installation standard of the original factory, in this way to ensure the accurate installation for the users.
two. This special design for the pin not only enhances its lodging resistance,ensure the visual appearance tidy but also reduces the air blockage chance, it also allows more heat dissipation area to improve heat transfer performance. In that way, the air conditioning system can achieve its expected function more efficiently.
3. Part of the products uses galvanised microchannel flat tube as material or adopt the powder coating treatment, in order to improve products’ corrosion resistance and prolong the service life.
4. By machining core into different thickness and wave distance and changing the amount of holes in flat tube,we can improve the heat dissipation efficiency of condenser of the product, lower down the system compression power, save fuel and improve economic efficiency.
five.CZPTy product is double checked and a pressure-holding device is installed to ensure that every product is 100% leak-free before it leaves the factory.
6. The company with a complete production chain, is focused on the developing new products, and keeping tracking of products to ensure the timeliness of all product supply, and also enhance the flexibility of enterprise operation.
seven.Only when we have an independent team with high efficiency can we satisfy CZPT demands.
Long time period organization is dependent on our trusted services, quick react and our professional encounter to Auto AC. We are going to turn into your spouse, not just your supplier.
one.CAD Drawing, and mould design base on your sample
two.Mould test and sample verification prior to mass production.
three.CZPTers of various transport traces.
four.aggressive freight offers and 1-cease services on clearing, delivery problems.
|Q1. Are you a factory or investing company?||A: we’re a self -own factory, we give a single-cease provider for our consumers, from spare elements to condenser, from specialized sales to shipping and delivery and to right after-sales, so as to help save the cost for client, handle the quality and direct time, give the ideal solutions|
|Q2: Where is your manufacturing facility positioned? How can I check out there?||A: Our factory is positioned in HangCZPT, Shan dong, China.
The closest airport is ZheJiang Yaoqiang airport or HangCZPT Liuting airport.
|Q3. What is actually the creation time for new molds and mass creation?||A: 7-ten days to develop the new moulds, mass generation will take around twenty-25days for 1 20gp,25-30days for one particular 40hq, can method urgently if need to have.|
|Q4: What is the payment phrases?||A: Telegraphic Transfer (T/T) and Letter of Credit rating (L/C).|
|Q5: Can you deliver me samples?||A: Of course, Samples are for totally free, and freight is on your aspect.|