A chain and sprocket travel is a kind of power transmission in which a roller chain engages with two or more toothed wheels or sprockets, used in motors as a drivefrom crankshaft to camshaft.
Ever-power is proud to share a wide collection of Sprockets along with our huge variety of agriculture, gardening, preparing and outdoor items. We stand behind all 26,000 products we sell with this Satisfaction Guarantee. CUSTOMER SUPPORT may be the cornerstone of our family business, and has been for over 50 years.
Ever-power drive sprockets provide tough, reliable service and feature replaceable tooth plates for easy field repair. Tooth plates for 102 and 142 series chain can be found with a segmental/symmetrical reversible tooth profile. The 142 DBL, TPL plus the 175 and 260 series use our non-symmetrical profile.
Travel sprockets weren’t always designed to be bolted on. At one time these were welded onto the final drive motor and needed to be trim off when they were replaced. Sooner or later, welded-on adapters were mounted that allowed the sprocket to be bolted on, and more modern designs utilize the bolted approach altogether.
When someone sends in a final drive motor for us to have a look at or?rebuild/reman, we advise them to remove the sprocket. We don’t need the sprocket in location to evaluate the motor and the added pounds (which is often significant) unnecessarily boosts your shipping costs.
Signs of Sprocket Wear
One’s teeth on a drive sprocket are where you search for wear . They must be tall and toned towards the end, not sharp or dished towards the end. And the sprocket, and more specifically its teeth, begin to wear, its size becomes smaller. This causes what is referred to as a pitch mismatch, where the pearly whites on the sprocket no longer connect to the track links as effectively. This can accelerate the wear of the sprocket and decrease the efficiency of your equipment.
If your sprocket shows sign of excessive wear, then its time to replace it before it starts to cause abnormal track wear or starts to negatively affect the performance of your final drive motor.
Preventing Sprocket Wear
Among the key methods to prevent accelerated sprocket dress in is to check on the track tension. If the tension is too tight, it’ll cause don on the sprocket tooth. We’ve talked before about the value of keeping the undercarriage clean, and the health of the undercarriage make a difference the track tension (particularly if there is normally a build-up of dried mud and debris). That’s area of the purpose we put so much focus on keeping the undercarriage clean
With out a functioning drive sprocket, your track drive won’t be able to propel your equipment. Fortunately, there are methods to help your drive sprocket last longer: keep carefully the track stress at a proper level and retain your undercarriage clean.
The undercarriage of your track machine should be inspected regularly. If you find early wear or harm to your tracks, a worn sprocket could be the cause.
15 cogs / teeth
16.77 inches in diameter
12 equally spaced bolt holes
Fits the following Bobcat Compact Monitor Loaders: T180, T190, T550, T590
Parts can vary depending on your serial number.
All sprockets Ever-ability sprocket tooth profiles are induction hardened to 55 Rockwell C., and so are replaceable. The substitute and maintenance of tooth plate segments will not require removal of the travel shaft, bearings, etc. Ever-power also designs custom split hub parts for retrofit applications that minimize field labor costs.
At initial glance, you might feel that if you’ve seen one drive sprocket, you’ve seen them all. However, Ever-electrical power provides added an I.D. lip and spiral band that captivate the needle bearing along with an exterior snap ring that boosts performance and dependability. While easy to overlook, it’s this attention to details that the racer features come to expect from Ever-power.
An I.D. lip and spiral band that captivate the needle bearing
Exterior snap ring caps sprocket in drum & increases durability
CNC-machined teeth feature a corrosion-resistant finish
Chain Type: #219
Tooth Configuration: Standard