The EP Greenhouse reducer is a compact and lightweight reduction gearbox with a limit switch system that is suitable for assembly of a locally available electric electric motor. The geared motor is used in manually-managed or climate-controlled ventilation and display systems in greenhouses. The quick and easy-to-install EP gearbox is definitely rainproof and windproof. The gear driver has a high protection course (IP65) and can be utilized within an ambient temperature of 0-60 °C.
The low-noise reducer for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminum precision housing. The self-braking worm wheel transmission means that the drive shaft is certainly locked when the reduction gearbox isn’t running. The fully sealed reduction gear driver has an growth chamber with a diaphragm to keep the gear oil at a low pressure under all situations, even at high temperatures. Thanks to the usage of an expansion chamber, the geared motor could be installed in any placement. There are no limitations, since there is no dependence on a bleed plug. The sealed reduction gear 
reducer keeps the apparatus oil of the gear reducer in ideal condition because of its entire operating life time. The gear driver is ideal for discontinuous use, operating course s3-30%, with a maximum activation time of 25 minutes.
The Gear box reduction geared motor comes with an FT85 motor assembly flange, to which a suitable IEC standard motor can certainly be installed (EN 50347).
The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit switch system is installed within an included chamber and is definitely enclosed by an impact-resistant plastic material cover. The limit change system is accessible and easy to adjust. The limit change system’s maximum switching range is certainly 40 or 64 revolutions of the drive shaft. The cabling is connected in spring-clip connections. The reducer has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The reducer for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.
Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of software of 4-pole electric motor.
Protection class IP65.
May be used in ambient temperatures of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, maximum activation time 25 moments.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installation of IEC standard motor (EN 50347).
Maximum switching range of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).