We are focused on research and development of products that meet up with the increasingly sophisticated electronics industry and so are widely used in computers, home appliances, consumer electronics, communications, facts, industry, medical and additional fields.
We also offers patent for 360 degree AC PIN interchangeable type adaptor in fact it is leading the world’s distinctive design.
Ever-Power provides goods which are smaller, lighter, more vitality efficient, and much easier to use.
We selling products across the world and obtain the certifications for every of country. And in addition acquired ISO9001:2015 and ISO 14001:2015 etc. to ensure products meet the latest regulations.
Gear adapters install between the vehicle Pto Adapter china transmission and power take-away, and 
can serve several purposes. Mostly, adapters are used to improve the route of rotation of the PTO outcome shaft. They can also be employed to space the PTO out and away from the transmission circumstance. On some imported or non-SAE standard transmissions they allow for the mounting of standard 6-bolt electric power take-offs. Gear Adapters can be found to match most popular transmissions.
Various body configurations: Can relocate the PTO output shaft to improve clearance for a driveshaft or direct-coupled pump
Adjustments PTO shaft rotation: Suits PTO rotation compared to that of the driven equipment
Standard and non-standard bolt patterns: Fits SAE typical PTOs to non-standard transmissions
• Frame made of 1/4″, 3′ x 3″ and 1/4″, 2″ x 2″ metal tubing
• Operates off of skid steer hydraulics
• Requires a minimum of 16 GPM; optimum of 22 GPM (creates 20 to 40 HP off of the power remove)
• No need to modify ability take off shafts
• Adjustable lower arms
• Reinforced heavy duty universal mounting brackets
• Complete with motor, hydraulic hoses and smooth faced couplers
• Ideal for three point electricity take off equipment – snow blowers, mowers, tillers, post hole augers, etc
: Over-running clutches provide a safe methods to protect operators and expensive machinery from scenarios when the inertia of PTO powered implement exceeds and over-runs the tractor PTO rate. In such a case, the over-jogging coupler will free-wheel
smoothly and safely. Over-working clutches will normally resist applications needing up to 65 h.p. at 540 rpm and 100 h.p. at
1000 rpm. Extreme shock loads or drive line angularity will reduce this capability
If the distance of your PTO will not fit correctly within a tractor, a PTO adapter can extend the size without having to replace it for a new one. This adapter comes with an overall amount of 7-3/16″ with a male end 1-3/8″ x 6 spline and a lady 1-3/8″ x 6 spline end.
Create additional length on the finish of your PTO. This tractor PTO shaft adapter possesses both a female 6 spline end and a man 6 spline end, each end includes a diameter of 1-3/8 in. This allows more connection choices and is perfect for anyone that owns an older tractor since the older parts might not exactly be produced anymore and are less common.
The over-running coupler is an essential part of PTO travel on rotary mowers, bailers, hay conditioners or any implement where inertia of driven unit could be required to over-run traveling source. The coupler drives solidly from tractor to put into practice and free wheels smoothly when implement exceeds tractor PTO speeds. All measurements are nominal.
Converts a 1 1/8″ keyed spline to a 1 3/8″ 6 spline.
Needed with 1000 RPM gearcase upgrade or Three Point Hitch system for the 25PTOC.
This Small 1000 (21 Spline) to 540 PTO Adapter is the perfect match for your Shop Dog. It usually is easily carried in the Shop Dog’s hitchpin and PTO adapter carriers.
This is also a good PTO adapter for tractor use. This adapter decreases the tractor’s PTO from 1-3/8″ x 21 spline to 1-3/8 6 spline (540) and extends the PTO shaft 4-1/8″. It has an overall amount of 6-3/8″ and is rated for tractors up to 70 HP.