Worm drive gearbox with motor
A robust worm-drive gearbox powered by an MM28 electric motor. Ideal applications where a simple to fit, high torque result is required. Great for student based projects which includes robots and buggies.
The unit has been designed so that the output shaft can be ‘clicked’ in and out for modification. E.g. cutting down to size. The engine is snap fitted into its cradle to activate the apparatus and worm.
1 – 6V DC
0.1A to 1A based on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
General dimensions of box + electric motor: 35(W) x 40(H) x 60(L)mm
The primary feature of the high-efficiency gear box is a worm gear, which locks the output shaft whenever the motor is not turning. The high equipment ratios of 216:1 or 336:1 get this to gearbox appropriate for little walking robots, lifting mechanisms, and other applications where high torque can be desired.
The low-voltage motors in the worm gearbox operate on 1.5-4.5 volts and draft to some amps, making them perfect candidates for the DRV8833 motor driver carrier. Electric motor overheating can be due to excessive stalling, actually at suprisingly low voltages. We recommend that you utilize stall-detection sensors, or just watch your robot, to make sure that it doesn’t stall for lots of seconds at a time.
This gearbox has a 4 mm diameter, round output shaft, which works with the wheels that are compatible with Tamiya 4 mm, round shafts. Our 3 mm universal installation hub also suits on small threaded end of the shaft, although it is not specifically designed to work with this kind of shaft (the hub’s set screw could damage the thread on the shaft).
Ever-Power equipment motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical correct angle worm geared motors established new criteria for reliability, effectiveness and economic climate with unparalleled features including hollow shafts in the smallest sizes. An inverter friendly style provides for easy integration right now and a future proof solution. The Ever-Power gear engine offers total flexibility in mounting options includes shaft, base, encounter, and flange solutions. The engine terminal box could be mounted in alternate positions rotated in 90º steps around the electric motor frame offering for unparalleled integration possibilities.
Ever-Power gear motors adhere to North American and International standards, including NEMA, IEC, CSA, and CE, the Ever-Power series allows for worldwide acceptance, a true total answer for our global clients.
Superior protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dust tight and hose proof,and can be used outdoors or in wet and dusty conditions without the use of additional enclosures. Complete rated output is offered by the output shaft of the unit.
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change initial after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Connecting with Connect connectors.
With included inverter up to 7,5kW.
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm gear motors are the remedy for applications requiring a corner turn, optional dual result, or an inability for the electric motor to be back again driven. The DC correct angle gear motors are created for continuous and intermittent duty operation. Our right angle equipment reducers were created with several mounting plate choices, making them well suited for a variety of DC motor based applications. You can expect 12 ratios which range from 5:1 to 100:1.
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Regular brush life of 2000+ hours (varies by application)
EP Products Worm Gear Motors are created to generate high torque in a small package size. Worm Gear Motors are excellent for applications that require a personal- locking or breaking feature because the result shaft can’t rotate when there’s no power applied. Additionally, Worm Gearheads can transfer movement in 90 degrees. With various decrease ratios, precision cut gears, voltages and sizes, EP Items has a DC Worm Gear Motor solution for your application.
Features and Benefits
HIGH Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Ability to Handle Large Gear Reduction Ratios
Security Door Locks / Industrial Conveying Systems / Security Gates / Dental care Chair / Ambulance Cots & Stretchers Quite a few DC Motors can be complimented with one of our Worm Gearheads. EP Products will continue to work with you to create and manufacture a Worm Gear Motor which will optimize the overall performance of your specific application.
Built to your unique requirements
Engine Type: Brushed / Brushless / Coreless
Shaft Material & Size
Shaft Configuration: (D Cut / Round / Splined / Other)
General Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Additional Assembly Requirements (lead wires, connectors, etc.)
The turbo metal gear worm motor uses a metal gear box for durability and a higher torque output. Because of the special mechanical framework of the worm drive the engine output shaft can be self locking and will not be rotated.
This part uses a two wire connection and supports direction control as well as PWM speed control. Rated voltage is 12v and will accomplish 40RPM, with a torque of 8kg/cm.
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
worm motor No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Ranked Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear products from EP DRIVESYSTEMS especially show their power in applications where high gear ratios are necessary. Our worm geared motors are for that reason optimally suited for use in intralogistics, packaging technology and the food & beverage industry.
Four great reasons for EP worm geared motors:
Our worm geared motors have a higher overload capacity
Washdown versions enable simple and effective cleaning of the drive program.
The NSD tupH sealed surface conversion is exceptionally chemical, corrosion and abrasion resistant.
Our modular style give users maximum freedom.
The modular system for optimum flexibility: Our EP worm gear units
There are numerous applications that want drive systems, and each one of these has its own unique requirements. The EP series worm equipment motors can be quickly and efficiently adapted to fulfill your needs.
Worm gear units impress with their high power density and small design. If required, we can also supply them with the impressive nsd tupH surface treatment.
As well as the basic EP casing, we offer an extensive line of bolt-on parts to customize the merchandise including torque arms, shaft covers and output flanges. These can be quickly field set up, but we may also be glad to assemble the individual components for you.
Discover more about the modular SI worm geared motors!
Find out more
Simple and Clean: The EP worm gear unit SMI
SMI worm gear units feature a easy, corrosion-resistant alluminum alloy housing. Optional nsd tupH surface conversion makes the product ideally suited for harsh and demanding industries like meals processing and pharmaceuticals.
Flexible input designs such as NEMA, IEC or direct motor mounts in additional foot or flange mounted housing designs.
Worm geared motors
Worm geared motors for small power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared engine program. The units have on all sides different repairing possibilities and enable a simple assembling for the customer.
Other drive configurationscan be designed by use of built-on accessories (e.g. torque arm and output flanges). The housings are made in light weight building out of aluminium die cast. Motor attachment is realised in general by means of IEC adapter B5 or B14A.
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:output shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm
Purchase Worm Drive Gearbox with Engine – incorporating the next features: 1 to 6V voltage rating, 17100 rpm simply no load velocity, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm wide, 40mm high, a robust worm drive gearbox powered by an MM28 engine (included), most suitable for applications where an easy to fit, high torque output is required, nylon housing and equipment, requires light essential oil or silicon grease lubrication, well suited for student based tasks including robots and buggies.
Most ideal for applications where a simple to fit, high torque output is required
Perfect for student based tasks including robots and buggies
Reversible High torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Reversible High torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
The motor is Gear DC engine with micro-turbine worm, you can transform the wiring-connection to improve motor rotation.
Turbo worm geared engine with self-lock, that is, in the case of motor without electrical, the output axis is definitely fixed, self-lock.
The reducer output shaft arranged vertically with the engine shaft, whole engine output shaft relatively-short than general gear engine, trusted to be installed the dimensions requirements strictly occasion.
No load speed: 40r/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Application: open the window, door, Mini winch. Ect.
In sumo robot or combat robot competition where high holding torque’s motor is essential in order to avoid your robot being pushed by your opponent robot. The worm gear is definitely a better option compared to the spur gear motor. Why is worm gear so unique? Check this wiki out: Worm Drive.
“Unlike with ordinary equipment trains, the direction of transmission (input shaft vs result shaft) isn’t reversible when using large reduction ratios, because of the higher friction involved between the worm and worm-wheel, when usually an individual start (a single spiral) worm can be used. This is often a advantage when it is desired to eliminate any probability of the output driving the input.”
In other words, it is challenging to push your load (example, your robot) if the motor is not power or rotate.
Features and Spec:
Metal gear box
Result shaft is self-locking due to the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Worm drive gearbox with motor