Make use of a tapered or QD bushing from Ever-Power with sheaves, pulleys, sprockets and several other power transmitting applications. Flanged quick-disconnect bushings include a completely split design to greatly help provide easy installation and disassembly. A tapered bushing with directly edges uses an interior screw to help drive the bushing into the shaft, while a split taper includes a flange and an integral on the bushing to greatly help provide more drive.
L – Space necessary to tighten bushing or loosen to remove hub with puller using short hex key.
M – Space necessary to remove bushing using screws as jackscrews – brief hex key – no puller reuired.
Listed necessary hub diameter can be for reference just. Severe conditions may necessitate larger hub and in some cases a slightly smaller sized hub may be satisfactory. Inquire about specific application.
We can also supply particular bushings manufactured from other machinable components. Please inquire
External key of all sizes for positive drive and greater torque carrying capabilities
Double-split barrel for positive clamping
Solid flange to keep up concentric bores
Available in inch, metric, and spline bores. Bore range between 3/8″ to 10″
Gates Taper-Lock bushings are accustomed to install pulleys, sprockets and sheaves on shafts. The durable stainless construction is well suited for meals and beverage applications or where noncorrosive sprockets are had a need to prevent rust.
This Taper-Lock bushing is ideal for use with same-type sheaves, sprockets, and pulleys in power transmission applications that require synchronous rotation. The carbon steel bushing provides power and resistance to wear and includes mounting bolts and washers. Taper-Lock sheaves, sprockets, and pulleys (not really included) are available in a number of outside diameters to fit this Taper-Lock bushing, permitting the precise selection of the amount of drive the teeth or grooves. This bushing can be suitable for use in an array of mechanical and electronic adjustable drives, including auto and printing industries.

Plain bearings provide low-friction sliding contact for relative motion between parts of a machine. They are the simplest type of bearing, with no rolling elements, and there are three fundamental types of basic bearings: radial ordinary bearings (also known as sleeve bearings or bushings) to support rotating or reciprocating shafts, thrust bearings (also called washers) to aid axial loads on shafts, and linear bearings to support and guide the movement of parts in a straight range. Flanged sleeve bearings have a flange on one end to aid axial loads. Spherical ordinary bearings are radial bearings that enable angular misalignment of the shaft. Plain bearings are made from durable, low-friction materials such as sintered or cast bronze alloys, plastic, or a mixture of a steel shell and a plastic-type Taper Bore Bushing material bearing surface. They could be lubricated externally or by a lubricant embedded in the bearing material. Plain bearings are found in automobiles, construction and mining equipment, textile manufacturing gear, and robotics, among others.
The maximum bore is supplied with a standard ANSI/AGMA 9002-B04 or ISO 286-2 keyway.
Taper Lock Bushing installation screws can be either inch (UNC) or metric (BSW) and care should be taken to select the proper hub part number.
Taper Lock Busings are a product of Baldor Dodge and so are not included with Lovejoy coupling hubs.
Maximum bores size and torque capacities are per Dodge specifications and Lovejoy isn’t accountable for the accuracy of any of the values listed in accordance with bore size and torque capacity.
Split Taper Bushings. Split-taper bushings are accustomed to mount sprockets, pulleys, and couplings onto shafts. They possess a tapered, split body that locks the bushing down onto the shaft, prevents it from slipping during operation, and transfers more torque.
All reborable bushings are stocked
without sawsplit to facilitatere-machining.
Sawsplit must be manufactured in bushing to permit it to compress for proper gripping of the shaft.
Adapters for TAPER-LOCK bushings are recommended for use where it is more convenient to straight bore than to drill, tap and taper bore hubs to accommodate bushings. The adapter is usually a gray iron, taper-bored sleeve whichfits into the directly bore of a hub. The bushing simply fits in the adapter which can be tapped for the bushing screws. When tightening the locking screws, adapter can be extended against the hub bore contracting the bushing tightly upon the shaft.
Ever-Power offers an comprehensive range of energy absorbing elastomeric isolators that limit the transmitting of structure-borne vibration and impacts. Our items are made for simple use and a multitude of orientations in compression, shear and slanted position loading. While economical, the products are made of quality rubber, silicone, Neoprene and steel components that enable support for the proper quantity of load for each software. Filter through our in-depth product listing of elastomeric products including foundation mounts, glass mounts, bumpers, bushings and grommets to find the right solution for your application.
Use a tapered or QD bushing from Ever-Power with sheaves, pulleys, sprockets and several other power transmission applications. Flanged quick-disconnect bushings feature a completely split design to help provide easy installation and disassembly. A tapered bushing with straight edges uses an interior screw to help drive the bushing in to the shaft, while a split taper includes a flange and a key on the bushing to help provide more drive.
L – Space necessary to tighten bushing or loosen to remove hub with puller using short hex key.
M – Space necessary to remove bushing using screws as jackscrews – brief hex key – no puller reuired.
Listed required hub diameter is definitely for reference only. Severe conditions may require bigger hub and in some instances a slightly smaller sized hub may be satisfactory. Inquire about specific application.
We can also supply special bushings made of other machinable components. Please inquire
External key on most sizes for positive drive and higher torque carrying capabilities
Double-split barrel for positive clamping
Solid flange to keep up concentric bores
Available in “, metric, and spline bores. Bore range between 3/8″ to 10”
Gates Taper-Lock bushings are used to attach pulleys, sprockets and sheaves on shafts. The long lasting stainless construction is well suited for meals and beverage applications or where non-corrosive sprockets are had a need to prevent rust.
This Taper-Lock bushing is suitable for use with same-type sheaves, sprockets, and pulleys in power transmission applications that want synchronous rotation. The carbon metal bushing provides strength and resistance to wear and includes installation bolts and washers. Taper-Lock sheaves, sprockets, and pulleys (not really included) can be found in a number of outside diameters to fit this Taper-Lock bushing, allowing the complete selection of the amount of drive the teeth or grooves. This bushing can be ideal for use in an array of mechanical and electronic adjustable drives, including automotive and printing industries.