The Taper Attach Direct Thread Adaptor offers a immediate thread interface for taper mounted suppressors. Two sets of wrench flats make it equally simple to attach or take away from the suppressor or your firearm’s muzzle threads. No proprietary tools required. Available in 1/2×28 and 5/8×24 with 18x1mm support coming soon. While it is practical to have immediate thread suppressor ability that may move from host to host without the need for further muzzle gadgets, it is necessary to remember that all host firearm must be checked for baffle alignment via visible inspection before firing.

The 1/2×28 Insert can be utilised with cartriges up to 30 caliber and the 5/8×24 can be utilised up to .338 caliber.

The use of direct thread adaptors boosts on immediate thread mounted suppressors, by allowing the finish user to have modular thread pitches. One Taper Mount Suppressor to Rule ALL OF THEM.
Black Nitrided
1.5 Ounce Weight
Wrench Flats for each contingency
Taper Install Repeatability and Stability
Multi-Thread versatility for your Taper Attach Suppressor
taper adapters allow the use of holders or equipment with a different machine-side taper then the equipment Taper Adapter spindle taper, such as for example utilizing a BT40 tapping chuck on a 50-taper spindle.

These adapters get rid of lead time losses in the event of a equipment breakdown. Adapters may also assist in testing custom tools on another machine than the planned production machine.

Taper adapters avoid the necessity for a supply of new holders or equipment for a particular machine. They arrive ready to apply with built-in locked clamping mechanisms featuring a clamping screw on a ball bearing for steep taper clamping or HSK locking unit for taper clamping.
The steep taper is the standardised form of a tool taper for clamping tools in the key spindle of a machine tool
The steep taper is standardised in DIN 69871 part 1
No self-locking (in contrast with the Morse taper), thereby making tool alterations easier without clamping. This is especially significant for programmed tool changes
Tiny clamping travel equals short clamping time
High torsional rigidity as a result of short distance between the leading edge and spindle bearing (short overall length)
For adapting morse taper equipment to milling devices that take R8 tools
Alloy metal hardened to 50-52 rc
Critical surfaces precision ground
Use in R8 Machines
Turning Tools More taper minimizing sleeve can be used to convert your headstock right from #2 MT to #1 MT. That is useful in case you have a drive middle or pen mandrel which is definitely 1MT and your headstock is 2MT