We – EPG Group the biggest Chain and agricultural gearbox factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
we supply chromed bar and tubes for hydualic and pheumatic cylinders, pto shaft, agricultural gearboxes etc. With EPG has set up a complete set of quality management system which is provided with advanced inspection and test equipment. over 30 years of combined experience in Bearings and Power Transmission, EPG is fully capable of designing and producing products to fit your specific application. Our experienced staff of engineers and customer service representatives look forward to providing you with any ISO 9001 certified manufacturer of precision roller chains. Types include single and multiple strand, hollow pin, side bow, rollerless, self-lubricating, straight sidebar, double pitch, brushed, nickel plated, armor coated, 304 stainless steel, leaf, hoist and O-ring, citrus, sorting and caterpillar roller chains.
INTRODUCTION
Steel Drag chains are designed for severely abrasive and extremely high-temp applications. For example, hot clinker and hot lime drag conveyors that run up to 1000ºF degrees. To provide greater fatigue life this series of chain is made with special heat treated and induction hardened pins. To provide a greater sliding resistance, both sides of the chain have a bead of hard face weld.
| Chain no. | Pitch P (mm) | Inner width of inner link b1(min) (mm) | Diameter of roller d1(max) (mm) | Diameter of pin d2 (mm) | Height of sidebar h (mm) | Thickness of sidebar T (mm) | Width of scraper L (mm) | Height of scraper h2 (mm) | Tensile strength Q (min) (KN) |
| LTF665 | 66.5 | 26.5 | 22 | 12 | 30 | 6 | 164 | 30 | 130 |
| LTF665 | 66.5 | 26.5 | 22 | 12 | 30 | 6 | 180 | 30 | 130 |
| LTF665 | 66.5 | 26.5 | 22 | 12 | 30 | 6 | 225-265 | 30 | 130 |
| LTF110 | 100 | 38.5 | 36 | 16 | 40 | 6 | 225-305 | 40 | 220 |
| LTF1 110 | 100 | 29.6 | 22.3 | 11.1 | 29 | 5 | 185 | 29 | 90 |
| LS125 | 125 | 32.5 | 28.6 | 14.3 | 42 | 6 | 235 | 42 | 170 |
| LS125A | 125 | 32 | 25 | 17 | 56 | 6 | 220 | 56 | 220 |
| LS125B | 125 | 32 | 36 | 20 | 60 | 6 | 290 | 60 | 300 |
| LS160 | 160 | 52 | 40 | 20 | 55 | 9.5 | 470 | 55 | 378 |
| LS160A | 160 | 52 | 40 | 20 | 55 | 9.5 | 580 | 55 | 378 |
| LS160B | 160 | 45 | 39.3 | 22 | 60 | 8 | 360 | 60 | 470 |
| LS160C | 160 | 36.8 | 36 | 18 | 48 | 8 | 160 | 48 | 240 |
| LS160D | 160 | 45 | 39.3 | 22 | 60 | 6 | 370 | 60 | 352 |
| Chain no. | Pitch P (mm) | inner width of inner link b1(min) (mm) | diameter of roller d1(max) (mm) | diameter of pin d2 (mm) | height of sidebar h (mm) | thickness of sidebar T (mm) | width of scraper L (mm) | height of scraper h2 (mm) | tensile strength Q (min) (KN) |
| M56-P63*218 | 63 | 24 | 10 | 30 | 4 | 218 | 30 | 56 | |
| GLF66.5*160/4L | 66.5 | 26.5 | 12.7 | 30 | 6 | 160 | 30 | 100 | |
| GLF66.5(6)D*200 | 66.5 | 26.5 | 12.7 | 30 | 6 | 200 | 30 | 100 | |
| LTF665-164 | 66.5 | 26.5 | 22.23 | 12 | 30 | 6 | 164 | 30 | 130 |
| LTF665-180 | 66.5 | 26.5 | 22.23 | 12 | 30 | 6 | 180 | 30 | 130 |
| LTF665-130 | 66.5 | 26.5 | 22.23 | 12 | 30 | 6 | 130 | 30 | 130 |
| LTF665-225 | 66.5 | 26.5 | 22.23 | 12 | 30 | 6 | 225 | 30 | 130 |
| TGSS25A 3 | 100 | 38 | 36 | 16 | 40 | 6 | 232 | 40 | 123.5 |
| DC1000ST000 | 100 | 25 | 14 | 40 | 5 | 180 | 40 | 156 | |
| P100*175 | 100 | 25 | 10 | 30 | 5 | 175 | 30 | 88 | |
| GLF100(6)D*225 | 100 | 38 | 36 | 16 | 40 | 6 | 225 | 40 | 150 |
| GLF100(6)D*294 | 100 | 38 | 36 | 16 | 40 | 6 | 294 | 40 | 150 |
| LTF100 | 100 | 29.6 | 22.23 | 12 | 30 | 6 | 185.6 | 30 | 130 |
| P110F2/2L | 125 | 32 | 15.85 | 35 | 6 | 235 | 35 | 170 | |
| P125-TIP-A | 125 | 30 | 15 | 40 | 5 | 160 | 40 | 80 | |
| DC1250ST005 | 125 | 35 | 18 | 50 | 6 | 200 | 50 | 176.4 | |
| DC1250ST006 | 125 | 35 | 18 | 50 | 6 | 250 | 50 | 176.4 | |
| DC1250ST007 | 125 | 35 | 18 | 50 | 6 | 300 | 50 | 176.4 | |
| DC1250ST571 | 125 | 30 | 16 | 40 | 6 | 280 | 40 | 169 | |
| DC1250ST011 | 125 | 25 | 14 | 35 | 5 | 180 | 35 | 117 | |
| M224-P125*385 | 125 | 43 | 21 | 60 | 8 | 385 | 60 | 224 | |
| M224-P125*285 | 125 | 43 | 21 | 60 | 8 | 285 | 60 | 224 | |
| GSS630 | 125 | 52 | 40 | 20 | 60 | 10 | 590 | 60 | 274.4 |
| DC125OST012 | 125 | 25 | 14 | 40 | 5 | 300 | 40 | 156 | |
| M112-P125*285 | 125 | 32 | 15 | 40 | 6 | 285 | 40 | 112 | |
| P125 | 125 | 52 | 44 | 22 | 60 | 10 | 445 | 60 | 376 |
| GLF125(6)D*300 | 125 | 32 | 18 | 50 | 6 | 300 | 50 | 190 | |
| FV90-P125-170 | 125 | 25 | 14 | 35 | 5 | 170 | 35 | 90 | |
| M112-P125*385 | 125 | 32 | 15 | 40 | 6 | 385 | 40 | 112 | |
| P150-TIP-A | 150 | 30 | 15 | 40 | 5 | 210 | 40 | 80 | |
| P160-TIP-A(I) | 160 | 30 | 15 | 50 | 6 | 265 | 50 | 140 | |
| P160-TIP-A(II) | 160 | 30 | 15 | 45 | 6 | 265 | 45 | 112 | |
| FV180-P160 | 160 | 45 | 20 | 50 | 8 | 390 | 50 | 160 | |
| GLF160(B)D1385 | 160 | 36 | 36 | 17.8 | 50 | 8 | 385 | 50 | 254 |
| P200*825 | 200 | 20 | 25.4 | 63.5 | 12.7 | 825 | 63.5 |
| Chain no. | Pitch P (mm) | Inner width of inner link b1(min) (mm) | Diameter of roller d1(max) (mm) | Diameter of pin d2 (mm) | Height of sidebar h2 (mm) | Thickness of sidebar T (mm) | Width of scraper L (mm) | Tensile strength Q (min) (KN) |
| DC101.6 | 101.6 | 31.75 | 31.75 | 15.8 | 50 | 8 | 154 | 138 |
| DC101.6 | 101.6 | 31.75 | 40 | 15.8 | 50 | 8 | 198 | 138 |
| DC101.6P | 101.6 | 31.75 | 40 | 15.8 | 50 | 8 | 279 | 138 |
| DC152.4 | 152.4 | 52 | 40 | 19.1 | 60 | 8 | 188 | 158 |
| DC152.4 | 152.4 | 52 | 40 | 19.1 | 60 | 8 | 250 | 158 |
| DC152.4P | 152.4 | 52 | 40 | 19.1 | 60 | 8 | 378 | 158 |
| Chain no. | Pitch P (mm) | Inner width of inner link b1(min) (mm) | Diameter of roller d1(max) (mm) | Height of sidebar h2 (mm) | Thickness of sidebar T (mm) | Diameter of pin d2 (mm) | Length of pin L(max)(mm) | Hole diameter of attachment plate d4(mm) | Central distance of holes of attachment plate | Outer width of attachment plate W(max)(mm) | Tensile strength Q(min)(KN) | Weight per meter q (kg/m) | |
| F(mm) | h(mm) | ||||||||||||
| HR6608-S-F20 | 66.27 | 27 | 22.2 | 28.6 | 6.3 | 11 | 65.7 | 9.5 | 95.6 | 25 | 180 | 70.6 | 65 |
| HR6608-S-F25 | 66.27 | 27 | 22.2 | 28.6 | 6.3 | 11 | 65.7 | 9.5 | 95.6 | 50 | 230 | 70.6 | 80 |
| HR6608-S-F28 | 66.27 | 27 | 22.2 | 28.6 | 6.3 | 11 | 65.7 | 9.5 | 95.6 | 50 | 260 | 70.6 | 90 |
| HR15718-S-F15 | 101.60 | 27 | 22.2 | 28.6 | 6.3 | 11 | 65.7 | 7.5 | 63.5 | 21 | 130 | 70.6 | 130 |
| HR15718-S-F20 | 101.60 | 27 | 22.2 | 28.6 | 6.3 | 11 | 65.7 | 9.5 | 95.6 | 25 | 180 | 70.6 | 210 |
| HR15718-S-F25 | 101.60 | 27 | 22.2 | 28.6 | 6.3 | 11 | 65.7 | 9.5 | 95.6 | 50 | 230 | 70.6 | |
| HR15718-S-F28 | 101.60 | 27 | 22.2 | 28.6 | 6.3 | 11 | 65.7 | 9.5 | 95.6 | 50 | 260 | 70.6 | |
why choose dcc?
1. EPT chain transmission manufacturing co.,Ltd is a professional manufacture of chains,and is the member unit of China National technical committee for stHangZhourdization for china transmission,
2.we occupied an area over 100 thousand sqm,owned stHangZhourd workshops over 30 thousands sqm and over 300sets of professional equipments to produce chains in large-scale as well as complete inspection and te EPT devices.
3.we passed through the authentications of ISO9001:2000 international quality system and ISO14001 environmental management system .
4,we have 75% of products which are exported to Europe,America,Japan , Southea EPT Asia ,and so on,
5.More than 10years factory experience ,Nearly all the parts are produced by our own factory,therefor we can control the co EPT and quality.
Choose DCC,you choosed High quality , competitive price,perfect service,
For more than 20 years, we have focused on custom chains.
For more than 20 years, We have done hundreds of different kinds of industrial chains.
So we have a wealth of custom chain experience.
Here are some of the varieties of the chains.
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.
