Single and double reduction planetary equipment drives to be utilized with electric, hydraulic, atmosphere motors or mechanical power insight from high speed, low torque sources to deliver decreased speeds at increased torques. The input aspect has regular SAE pads for motor mounting. Available in the three result configurations proven below. Many units can be furnished with an intrinsic parking brake.
Single reduction drives are limited by 3500 RPM input; dual reduction drives to 5000 RPM. Units with integral parking input rate is limited to 2500 RPM.The same torque is available in either direction of rotation. Torque rankings are intermittent. For continuous operation reduce torque ratings to about 1/3 to 1/2 the values shown. Models provide 95% power transmitting efficiency.

Wheel Drive
Input side has regular SAE pads and splined input. Output side has hub for mounting automobile wheel. Free wheel can be done by using the spring disconnect to disengage the drive shaft. The disengage feature is usually regular on all wheel drives.

Shaft Output
Input side regular SAE pads with splined insight. Output side choices include: Keyed round, hexed, hollow, tapered or splined shaft.

hydraulic planetary drive spindle Drive
Input side is standard SAE pads with splined input. Output side has a flanged spindle for coupling to the load.

Swing Drives
Ever-Power model 6 emerges with or without essential parking brakes. The “SW” Power Wheel offers extra-large tapered roller bearings, a ductile iron hub and heat treated ring gear to reduce backlash growth caused by wear. The external bearing nut provides the best in shaft retention and shaft power. Output can be a spindle shaft or different sizes of integral pinion gears.