Good High quality Cement CZPT CZPT Screw CZPT with CE
- The LSY sequence screw conveyor is a new kind of transportation gear, which is largely utilised for transporting cement, fly ash material in concrete mixing station and other suitable areas.
- It can also be employed in chemical, metallurgy, granary processing, warehousing.
- it can also match with other transport gear to attain joint transportation or independent transportation.
|Screw speed(r/min)||two hundred|
|Entire body diameter(mm)||Φ325|
|Shipping and delivery angle||≤45°|
|CZPT capability(t/h)||seventy five|
|Motor Electrical power(kw)||11-22kw|
Screw conveyor composition:
Feeding inlet, discharge outlet, motor, retarder, bearing, helical blade, closed groove, hanging bearing, bearing spiral,universal joint, suction flange, outer tube, relationship flange, observation window, etc.
The Structure Diagram
one.It is relevant to transport different sorts of unfastened content such as electrical energy, granular and small-piece materials this sort of as clay powder, braize, cement, sand, grain, small coal briquette, cobble and iron filings, and so forth.
two.Screw conveyors is not relevant to transportation substance which is high viscosity and simple to be curdled.
three.The proper ambient temperature for screw conveyor is 20ºC to 50ºC. The content temperature need to be considerably less than 200ºC.
- Undertake substantial-top quality steel pipe with good integral rigidity.
- Undertake optional universal ball joint, which facilitates installation, adjustment and steering.
- With high-good quality reducer and heavy-layout, it has the positive aspects of large torque, minimal sounds, no dust leakage, long service existence.
- The design of double pitch for reducing the compress extent of the content in transportation, is especially suitable for long-distance transportation of cement and other powder components.
- .Huge inventory for common diameter of 219,273,and dimension & angle can be CZPT according to your
When the screw shaft rotating, the gravity of the materials and the friction force produced by the material and trough wall enable the substance transfer CZPT alongside the bottom of the conveyor with the thrust of blade. The conveying of content in the center bearing relies on the CZPT thrust of hinder material. The screw conveyor market the substance to move CZPT by the fixed screw’s rotational motion and rectilinear motion.
1.The screw conveyor can not be installed until the dust stuck during transportation or
unloading is cleaned.
2.Substance groove center line and screw shaft should have an appropriate coaxial degree.
three.The junction of every single segment of the materials groove must be connected closely and can not be dislocated. The spacers can be additional in between the joint and the section, the top cover and the materials groove, to ensure the seal of content groove. Meanwhile the length error of the materials groove can be adjusted.
4. The space between the interior wall of the material groove and the screw must be equal.
five.The generate device and the screw shaft need to have a right coaxial degree. You can change the top of the push unit by adding spacer .
six.The static equilibrium test must be carried out following the screw is set up.
seven.After the conveyor put in, check out no matter whether there is any debris in the machine and if the lubrication is enough.
(one) Lubricate the bearings, gears, chains and other transmission parts regularly.
(2)When the box-to-send out equipment stopped, examine the abrasion of the spiral blade and restore and weld it when it wears seriously.
(three)The conveying volume can not be overloaded, otherwise the material will not be discharged, which may cause the screw shaft bending and box growth.
(4) In the operation of the conveyor, if the sound is harsh, you ought to open up the lid to check it and troubleshoot.
HangCZPT TRUSEEN CZPT CO,.LTD
Tel: -371-86238892 Mobile cellphone:15617732826
Add:HangCZPT Substantial-tech CZPT CZPT Zone,ZheJiang Province,P.R.China