Agricultural Gearbox
The agricultural gearbox is the primary mechanical component of the kinematic chain of agricultural machines. It is normally driven by the tractor power take-off via the PTO shaft and the gearbox drives. The operating torque may also be transmitted to the gearbox by hydraulic motors or belt pulleys, furthermore to chain gears.
Agricultural gearboxes will have 1 input shaft and at least one output shaft. If these shafts are positioned at 90° to one another, the gearbox is an ORTHOGONAL ANGLE gearbox or more frequently called a right-position gearbox.
rotary tiller gearbox is definitely adopted middle equipment transmission system, mounted with the tractor of 12-80HP. Tractor wheel tracks are completely protected after tillage as the functioning width is a lot wider. The quality is reliable and the overall performance is well. So it can be used on dry and paddy field. It could reduce the time, laboring, and price, etc. during operation
Increasers and Reducers
When the gearboxes have the two gears with different amounts of teeth.
The gearbox is a reducer when the driving gear, i.e. the one with the insight shaft, has the fewer quantity of teeth (pinion), hence the result shaft rotates slower compared to the input shaft.
It is named an increaser when the input shaft is mounted on the apparatus with the larger quantity of teeth (crown), hence the result shaft rotates faster compared to the input shaft.
Right-angle gearboxes, distributors or rotational reverse gearboxes
When the gearboxes have gears with the same number of the teeth.
The gearbox is known as right-angle 
when it only has two shafts (input and output),
whereas it is called a distributor whenever there are at least two output shafts.
It really is called a rotational invert gearbox and parallel offset in the versions with parallel shafts with two gearboxes.
Speed change
in addition to the primary pair of gears and relevant shafts, the gearboxes could also have other gears with a different amount of teeth. The apparatus shift of the main pair of gears with the secondary ones enables different speeds. The manual switch of the secondary gear set with gears with different number of teeth allows adjustments to the result rotation speed.
CMR GROUP can design and produce also agricultural machinery applications.
gearbox for agricultural machinery is a pattern that is slowly rising.