Transport chain is the chain as a carrier for traction and transportation of materials, transport chain can be used ordinary sleeve roller conveyor chains, may also have other kinds of special chains (such as product release chain, speed chain.)

Standard width conveyor chain 200,300,400,500,600,700,800,1000,1200,1500,2000 mm, also according to customer needs with special specifications. Transmission chain transmission capacity, the main transport pallets, boxes and other large-scale flow. Conveyor chain structure forms, and a variety of attachments, easy to implement product release delivery, assembly line can be used as storage or as material transported. Powered roller conveyor chain roller barrel by the force components, aluminum side plates, film frame, rod, bearings, drives and chain composition.

Non-powered roller barrel assembly from the non-powered roller, aluminum side plates, film frame, tie rod, bearing composition. Power transmission roller chain driven by a traction drive chain, the chain of the power drive sprocket on the roller drum rotation, and thus transported by the rotation of the work. Non-powered roller conveyor chain pull the workpiece or the workpiece by the person squeezing the workpiece, the roller is free to move.

I have strong technical force, advanced technology, new product development cycle is short, complete detection means perfect. Products are sold throughout the country. Welcome customers to order the exchange.

Application: Rolling mill drive with chain.

Fault conditions: corrosion.

Diagnosis: the application of the chain environment pollution. Regular lubrication of the chain is not the external parts be eroded, and eventually roller stuck. Therefore, the chain of serious wear and tear on the roller.

Solution: Strengthen maintenance lubrication, avoid contact with water.

Applications: Post-watt machine ditch the chain drive used on.

Fault condition: cracks in the outer plate.

Diagnosis: because of the high impact load, the edge of plate holes, cracks and gradually expanded.

Solution: avoid high-impact load, or select a larger pitch chains.

Application: single-row chain drive transmission.

Fault conditions: corrosion and erosion.

Diagnosis: When the chain is 75% water +25% of the caustic solution work, by the strong chemical corrosion. Stiff joints caused by corrosion.

Solution: Install Renold Hydro-Service chain.

1, the periodic inspection and lubrication of the chain run, and if use of poor quality lubricants, should be cleared up with powder residue into the plug chain and within the chain.

2, should be replaced frayed elbow.

3, note that the actual temperature of the oven, can not make the chain more than the normal operating temperature within the long run.

4, the chain can not be distorted environment.

5, complex operating environment and less turning radius, makes the chain are damaged and deformed, worn down faster, the design of its operation should be considered reasonable.