Fan Electric motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, taken off unused 18” or 24” China Air Compressor diameter TPI fans. Designed to run an 18” or 24” enthusiast blade (blade NOT included).
This motor includes a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All the electric fan motor china wiring in the middle of your electric electric motor, capacitor and quickness control change is still installed nevertheless the cord itself is normally detached as seen in the photos. (Discover “Control Notice” below for modify type.)
T (See “Application Notice” below for utilize in various other applications.)
Dimensions: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft is usually½” (0.500″) diameter x 2 ½” lengthy with a collection screw clean. There are (4) threaded mounting lugs on leading of the motor, ½” long x .16 dia. with washers and nuts. The studs may actually ‘ve got 4mm threads and also to end up being on a 117mm (4.6”)diameter circle (3 ¼” measured in one stud to the next).
Rate: The approximate electric motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electric motor) is Clockwise.

Control Take note: Motors may come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH versions in the images). These two types of switches both control the engine in the same way (but you possess a rotating knob and you possess a pull-chain). If you order several motor at the same time, we will do our best to supply your order with each one kind of control or the excess.
Application Note: Do NOT use this electric motor in a nonfan app. This is a totally enclosed fan electric engine and designed to have continuous ventilation over the engine casing for cooling. The casing isn’t vented and the electrical electric motor will overheat and get into automatic thermal overload if operate in a nonfan system where there isn’t solid ventilation past the engine. (Caution Note: the electric motor will restart immediately when it cools cool off.) Using this electric motor for applications aside from 18 & 24″ TPI fans may possibly also overload the motor and cause it to proceed into automated thermal overload. (Your lover blade from another producer may have a steeper blade angle.)
Origin: This electric motor is manufactured in China.