Worm Gear Velocity Reducers: Double Reduction
Ever-Power. manufacturers double lowering Worm Gear reducers that are built to last. Double decrease units are created with the same high quality elements as the single decrease Worm Gear reducers.
Double Decrease Worm Gear Speed Reducer Features
Cost effective
High Reduction: 75:1 – 3600:1 and higher
C-face input or stable shaft input
Mix of two single reduction reducers
Solid or hollow outcome shafts available
Several varieties of bolt-on bases available
Huge tensile strength cast bronze worm wheel and a hardened and floor alloy steel worm made integral with the shaft for longer and trouble-free life
All cast iron construction
9 Versions: I, IC, IS, ICS, IM, IMS, ISF, ICSF, IMSF
Double Decrease Worm Gear Velocity Reducer Applications
Conveyors
Packaging Machinery
Cranes/ Hoists/Winches
Mixers/ Agitators
Shipping & Delivery
JIT delivery
Standard shipping: 3-4 days
Same/next day delivery on stock items at no additional
cost
Twice reduction gearing mechanism is utilized in large machinery and automotives where in the speed needs to be lowered at a necessary level. For eg if the input speed is definitely 2000rpm and the output swiftness desired is usually 300rpm a reduction gearing system is used like a reduction gear box. Yet, in case of double reduction mechanism, the reduction of speed takes place in 2 steps. Initially the source from the engine shaft includes a pinion mounted onto it through couplings. This pinion gear is then linked to an intermediate equipment which is first lowering gear. This gear is then connected to another low quickness pinion on another shaft. This low rate pinion is linked to the next reduction gear which is attached on the propeller shaft which may be the output.
Greaves Double Reduction Velocity Reducers are two level worm reduction systems. A specially designed primary worm decrease unit is integrally attached on a standard single lowering Greaves worm reducer which varieties the second stage. The composite devices provide the most small and rigid arrangement for large reduced amount of speed necessary for slow going machinery. A broad range of ratios upto 4900:1 is available.
The wormshafts are made from top quality case hardening steeL accurately generated, ground and superfinished. The wormwheels comprise of phosphor bronze centrifugally cast rims of substantive sections welded to rigid centres. Considerable flexibility of shaft layout is usually permissible with all sorts of Double Reduction units
Ever-Power Double Reduction Worm Gearboxes will be two stage worm reduction units.
A specifically designed primary worm decrease product is integrally mounted on a standard single decrease AGNEE worm gearbox which forms the second stage. The composite devices provide the most small and rigid set up for large reduction of speed necessary for sluggish moving machinery. A wide selection of ratios up to 4900:1 is offered.
Double Lowering Worm Gear Container Sizes Available with us are 40, 50, 60, 75, 85, 100, 125, 150, 175, 200, 250, 300, 350, 430.
Nominal Gear Ratios: 100:1, 150:1, 200:1,300:1, 400:1, 600:1, 750:1, 1000:1, 1200:1, 2000:1, 2800:1
Nominal ratios listed are a typical selection of commonly utilized ratios from the overall range of Ever-Power Twice Reduction Worm Gear Box. Information on other ratios available on request.
Under Driven / Over Driven / Vertical Input or Output Shaft Variant / Shaft Mounted Version / All sorts with motor installation adaptor /
motor – optional
The worm shafts are made from high quality case hardening steel, accurately generated, ground and super finished. The worm wheels comprise of phosphor bronze centrifugally cast rims of significant sections welded to rigid centers. Considerable flexibility of shaft layout is normally permissible with all sorts of Double Reduction models.
Product Description
The products are widely applied in the creating equipments of all sorts of industries domestic and overseas. They will be the best options for double reduction gear reducer nowadays modern facilities of mechanical reducing drive control to know large twisting distance, significant gear ratio, low sound, high performance and low temperature.
Description:
Customized top quality double worm gear rate reducer aluminium gearbox lowering gearbox with electric motor
Ratio:
7.5,10,15,20,30,40,50,60
Color:
Blue, Silver Or since customer’s requirements
Noise:
low noise (<50DB)
Advantage:
Great Efficience and low noise and low temperature
Material:
Housing: Die-Cast Aluminum Alloy
Worm Gear-Bronze 9-4#
Worm-20CrMnTi with carburizing and quenching, surface harness is 56-62HRC
Shaft-chromium steel-45#
Packing:
Carton and Wooden Case
Bearing:
C&U Bearing
Seal:
NAK SKF
Warranty:
One Year
Input Power:
0.06kw, 0.09kw, 0.12kw, 0.18kw, 0.25kw, 0.37kw, 0.55kw, 0.75kw, 1.1kw, 1.5kw, 2.2kw, 3kw, 4kw, 5.5kw, 7.5kw, 11kw, 15kw
Usages:
Industrial Machine: Food Products, Ceramics, Chemical, Packing, Dyeing,
Wood working, Glass.
IEC Flange:
56B5, 56B14, 63B5, 63B14, 71B5, 71B14, 80B5, 80B14, 90B5, 90B14, 100B5, 100B14, 112B5, 112B14, 132B5, 160B5
Lubricant:
Synthetic & Mineral