We – EPG Team the most significant Chain and agricultural gearbox manufacturing facility in China with 5 various branches.
The new products contain a sequence of substantial-tech and higher high quality chains and sprockets and gears, this sort of as chains and gearboxes for agricultural machineries, metallurgical chains, escalator stage-chains, large-pace tooth chains, timing chains, self-lubrication chains, among which have type substantial velocity tooth chain for auto branch dynamic box and aerial chains fill in the blanks of chain in China. Common We are aiming to satisfy the requires of the customers close to the entire world.. a specialized provider of a total variety of chains, sprockets, gears, gear racks, V-belts, couplings and reducers， pto shaft, agricultural gearboxes….strands have an even amount of pitches, pin backlinks, and roller hyperlinks. A roller chain strand can be shortened by removing backlinks and lengthened by including complete or a half backlinks (offset hyperlinks). ISO 9001, ISO/TS 16949 and AS9100 qualified. Company of regular and custom made roller chains for use in a broad variety of applications. Roller chains are available in one-pitch, double-pitch and precision versions. Meets or exceed ANSI requirements.
OUR Goods Listing:
.Stainless steel roller chain
| DIN/ISO | ANSI | Pitch | Roller | Width | Pin | Pin | Lnner | Plate | Ultimate | Regular | fat | |
| KIN/ISO | ANSL | among | diameter | length | plate | thick | tensile | tensile | for each | |||
| Chain | Chain | inner plates | depth | -ness | energy | strength | meter | |||||
| No. | No. | P | d1 | b1 | d2 | L | Lc | h2 | T | Q | Q0 | q |
| max | min | max | max | max | max | max | min | |||||
| mm | mm | mm | mm | mm | mm | mm | mm | kN/LB | kN | kg/m | ||
| *03C | *15 | four.7625 | 2.forty eight | two.38 | one.62 | 6.one | 6.nine | four.three | .6 | one.80/409 | 2 | .08 |
| *04C-1 | *twenty five | 6.35 | three.three | three.18 | 2.31 | seven.nine | eight.4 | 6 | .eight | 3.fifty/795 | 4.six | .fifteen |
| *06C-one | *35 | 9.525 | five.08 | 4.77 | three.58 | twelve.four | 13.17 | 9 | 1.three | 7.ninety/1795 | 10.eight | .33 |
| 085-1 | 41 | 12.seven | 7.seventy seven | six.twenty five | 3.58 | 13.seventy five | fifteen | 9.ninety one | one.3 | six.sixty seven/1516 | twelve.six | .forty one |
| 08A-1 | 40 | twelve.7 | 7.ninety five | 7.85 | 3.ninety six | 16.6 | 17.eight | 12 | one.five | fourteen.ten/3205 | 17.5 | .sixty two |
| 10A-1 | 50 | fifteen.875 | 10.sixteen | nine.four | 5.08 | twenty.seven | 22.two | 15.09 | 2.03 | 22.20/5045 | 29.four | one.02 |
| 12A-1 | sixty | 19.05 | 11.ninety one | 12.57 | 5.94 | twenty five.9 | 27.7 | eighteen | 2.forty two | 31.eighty/7227 | forty one.5 | one.five |
| 16A-1 | 80 | twenty five.4 | fifteen.88 | 15.seventy five | seven.ninety two | 32.seven | 35 | 24 | three.twenty five | fifty nine.70/12886 | 69.4 | two.six |
| 20A-1 | one hundred | 31.75 | 19.05 | 18.nine | nine.fifty three | 40.4 | forty four.7 | 30 | four | 88.50/20114 | 109.two | 3.ninety one |
| 24A-one | one hundred twenty | 38.one | 22.23 | twenty five.22 | 11.one | 50.three | 54.three | 35.seven | 4.eight | 127.00/28864 | 156.3 | 5.sixty two |
| 28A-1 | one hundred forty | forty four.45 | 25.4 | twenty five.22 | twelve.7 | 54.4 | fifty nine | 41 | five.six | 172.forty/39182 | 212 | seven.five |
| 32A-one | 160 | 50.8 | 28.fifty eight | 31.fifty five | 14.27 | 64.eight | sixty nine.6 | 47.eight | 6.four | 226.eighty/51545 | 278.9 | one.one |
| 36A-one | one hundred eighty | fifty seven.15 | 35.seventy one | 35.48 | 17.46 | seventy two.8 | seventy eight.six | 53.six | 7.two | 280.twenty/63682 | 341.8 | 13.45 |
| 40A-1 | two hundred | 63.5 | 39.sixty eight | 37.eighty five | 19.eighty five | eighty.three | 87.two | 60 | eight | 353.80/80409 | 431.six | sixteen.15 |
| 48A-one | 240 | 76.two | forty seven.63 | 47.35 | 23.81 | 90.5 | 103 | seventy two.39 | nine.five | fifty one.thirty/115977 | 622.five | 23.2 |
| DIN/ISO | Pitch | Roller | Width | Pin | Pin | Lnner | Plate | Greatest | Typical | bodyweight | |
| KIN/ISO | amongst | diameter | length | plate | thick | tensile | tensile | for each | |||
| Chain | inner plates | depth | -ness | toughness | power | meter | |||||
| No. | P | d1 | b1 | d2 | L | Lc | h2 | T | Q | Q0 | q |
| max | min | max | max | max | max | max | min | ||||
| mm | mm | mm | mm | mm | mm | mm | mm | kN/LB | kN | kg/m | |
| 04B-one | six | 4 | 2.8 | one.eighty five | 6.eight | 7.eight | five | .6 | three.2/682 | three.two | .eleven |
| 05B-one | 8 | 5 | three | 2.31 | 8.two | 8.9 | seven.one | .8 | five./1136 | 5.9 | .two |
| *06B-1 | 9.525 | 6.35 | 5.seventy two | 3.28 | thirteen.fifteen | fourteen.one | 8.2 | one.three | 9./2045 | 10.four | .forty one |
| 08B-one | 12.7 | eight.fifty one | 7.seventy five | 4.forty five | 16.seven | 18.2 | eleven.8 | one.6 | eighteen./4091 | 19.four | .69 |
| 10B-1 | 15.875 | ten.16 | 9.sixty five | 5.08 | 19.five | twenty.nine | 14.7 | 1.7 | 22.4/5091 | 27.five | .ninety three |
| 12B-1 | 19.05 | 12.07 | eleven.68 | 5.72 | 22.five | 24.2 | 16 | 1.eighty five | 29./6591 | 32.two | one.fifteen |
| 16B-one | 25.four | fifteen.88 | seventeen.02 | eight.28 | 36.one | 37.four | 21 | 4.fifteen/3.1 | sixty./13636 | seventy two.8 | two.seventy one |
| 20B-1 | 31.seventy five | 19.05 | 19.56 | ten.19 | 41.three | forty five | 26.four | four.5/3.five | ninety five./21591 | 106.7 | 3.seven |
| 24B-one | 38.one | 25.four | 25.4 | 14.sixty three | 53.4 | 57.8 | 33.2 | 6./4.8 | one hundred sixty./36364 | 178 | seven.1 |
| 28B-one | forty four.forty five | 27.ninety four | 30.ninety nine | 15.nine | 65.1 | 69.five | 36.7 | seven.5/6. | 200./45455 | 222 | eight.5 |
| 32B-1 | fifty.8 | 29.21 | thirty.ninety nine | seventeen.81 | sixty six | 71 | forty two | 7./6. | 250./56818 | 277.5 | ten.25 |
| 40B-1 | sixty three.5 | 39.37 | 38.one | 22.89 | eighty two.2 | 89.two | fifty two.96 | 8.5/8. | 355./80682 | 394 | 16.35 |
| 48B-one | 76.two | 48.26 | forty five.seventy two | 29.24 | 99.one | 107 | 63.8 | 560./127272 | 621.6 | 25 | |
Merchandise display
Our workshop
Our scorching therapy tools
EPT roller chain and conveyor chain
1.Bicycle chains: 408,410,415
two. EPT chains: 04C, 25H, 06C, T3, 270H,415H, 420, 420L, 425, 428, 428H, 520,
525, 530
three.ASA roller chains: 35, 40, forty one, fifty, 60, 60H, 80, 80H, one hundred, 120, 140, one hundred sixty, 200, 240
(Catalog)
four.Chain (British stHangZhourd): 05-B, 06-B, 08-B, ten-B, twelve-B, 16-B, twenty-B, 24-B, 28-B,
32-B, forty-B (Catalog)
5.Massive pitch chain: one hundred, 100H, 120, 120H, one hundred forty, 140H, 160, 160H, 180, two hundred, 240
6.Prolong-pitch precision roller chain: 208A, 208B, 210A, 210B, 212A, 212B, 216A,
216B, 220A,220B,224A,224B,228B,232B
seven.Roller chains for beer buntline conveyor: CK-70S,CK-100S,CK-100SA,CK-100SC,CK-133XA,
CK-140X, CK-140XA,CK-150X,CK-150S,CK-154X,CK-155X,CK-155XA,CK-160X,CK-160XA,CK-160XB,CK-160XC,CK-165X,CK-165XA, CK-169, CK-180X,CK-180XA,CK-200S,CW-102,CW-127
eight.Employ roller chain for conveyors: 81X, 81XH,81XHH,CA550,CA555,CA620
9.Multi strand measurements obtainable up to 5 strand, for select dimension stHangZhourd attachment available
ten.Chains from 04b~16b are with spring clip, EPT are riveted cottered design
is offered for dimensions eighty to 240
11.Stainless metal chain and nickel plated chains is available unique design also available
(i.e., oven conveyor) and we can produce as for each material your requests, generally stainless steel chains material is SS304, if you require SS316 or SS316L and so on. it is accessible as well
12. weld metal chain, type WH78, WH82, WH110, WH124, WH132 and so on.
FAQ
Q: Are you investing firm or maker ?
A: We are factory.
Q: How extended is your delivery time?
A: Typically it is 5-ten times if the products are in inventory. or it is 15-20 times if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free of charge or further ?
A: Sure, we could offer the sample for free demand but do not pay the co EPT of freight.
Q: What is your phrases of payment ?
A: Payment thirty%TT in advance. 70% T/T ahead of shippment
The use of authentic products manufacturer’s (OEM) portion figures or logos , e.g. CASE® and John Deere® are for reference functions only and for indicating item use and compatibility. Our business and the listed replacement parts contained herein are not sponsored, approved, or made by the OEM.
