18mm Black Alloy Link Chain for Mine Equipment

Mine Chain

In the mine mining function web site, often need lifting functions, normally also can not be divided from the lifting chain.Lifting chain in such events have specific demands, so there are particular qualities of the lifting chain – mining chain.


High quality common  Manufacturing standard is GB/T12718-2009. PN-G-46701:1997, in full compliance with ISO-610-1990(E) and DIN22252:2001-90 standard’s policies.
Application area  Mine, transportation.
Materials Incorporate: Cr,Ni, Mo high good quality alloy.
Energy grade B, C, D.
Surface processing Backing paint, black , galvanized

Chain:Thchnicle prameters  of mine ring

Spherical chain specfication
Solution chain ring diameter(mm) Pitch  p*(mm) Least internal widtn Maximum outer width Arc redius Examination load(kn) Least split load(kn) Optimum elongation underneath examination load Minimal total elongation below split load High quality quality
10*40 10±0.4 40±0.5 twelve 34 fifteen eighty five 110 1.four 12 B
100 a hundred thirty one.six twelve C
14*50 14±0.4 50±0.five 17 48 22 150 190 1.4 12 B
200 250 one.6 twelve C
eighteen*sixty four 18±0.5 64±0.6 21 sixty 28 260 320 1.4 12 B
330 410 1.six 12 C
22*86 22±0.7 86±0.9 26 74 34 380 480 1.four 12 B
490 610 one.6 twelve C
26*ninety two 26±0.eight 92±0.9 thirty 86 40 540 670 1.four twelve B
680 850 one.six 12 C
thirty*108 30±0.9 108±1. 34 ninety eight forty six 710 890 one.four 12 B
900 1130 one.six twelve C
34*126 34±1. 126±1.two 38 109 52 900 1140 1.four twelve B
1160 1450 one.six 12 C
38*137 38±1.1 137±1.four 42 123 28 1450 1810 1.6 12 C
42 one hundred ten
42*146 42±1.three 146±1.five forty six a hundred thirty five sixty four 1770 2220 1.six 12 C
46 a hundred and fifteen
48*152 48±1.5 152±1.five 62 163 seventy eight 1850 2900 one.six twelve C
56 127

Our solution:

 Usage of the chain and matters needing interest

one. Prior to using the chain and chain rigging, please see clearly the doing work load and application scope on the signal. Overload is strictly prohibited.

2. In regular use, lifting Angle is the important to have an effect on the load, the greatest integrated Angle of lifting shall not exceed one hundred twenty degrees, otherwise local overload of chain rigging will be triggered.

3. Irregular connecting elements are prohibited to connect the chains.

four. The bearing chain rigging is forbidden to be straight hung on the associates of the crane hook or wound on the hook.

five. Temperature has certain influence on the use of chain rigging.

6. The lifting stage of the lifting hook is needed to be on the exact same plumb line with the hefty lifting heart, so that the lifting bodyweight is in a stable and balanced point out, to prevent the lifting from sliding or capsizing.

7 among the chain is prohibited to twist, twist, knot, adjacent chain pursuits must be adaptable.

eight. When lifting heavy objects, rise, fall and quit gradually and steadily. Spend attention to the objects being lifted steadily and steer clear of impact load.

nine. Do not attempt to force the chain rigging from underneath the bodyweight or enable the fat to roll more than the chain.

ten. The chain shall be cleaned and analyzed right after use, and the storage area shall be ventilated, dry and free of charge of corrosive gases

Scrap standards for mining chains

The chain shall be scrapped if any of the adhering to problems happens:

one. Clear cracks, paint reduction and rust show up on the surface of the chain.

two. The chain has evident interior corrosion.

3. The chain has critical deformation, knotting use or stretching fee of much more than 5%.

four. The chain and the hyperlink of the sling ring or hook are damaged.

5. The integrated Angle frequently exceeds 120 degrees when the full set of chain rigging is in use.

6. In circumstance of the rated load of the chain cable, lift the hefty bodyweight.

7. The wear of the chain diameter is up to ten% of the authentic diameter.

Our customers:

Packaging and supply:

Packing particulars: 
Bulk packing
Packed in wooden cases
Packed in Iron drum, then in pallets
In accordance to your specifications

Shipping Element: Normally thirty days following receiving your irrevocable L/C or progress payment

18mm Black Alloy Link Chain for Mine Equipment